We can start from the following aspects when configuring the stone production line:
1. Stone hardness: the crusher used for different stones is different. For stones with higher hardness, such as cobble, granite and quartz stone, the selection of equipment such as jaw crushing will be more wear-resistant. If it is limestone, gypsum, coal gangue and other low hardness stones, generally choose the equipment of impact breaking, hammer breaking and impact breaking, which can save cost. According to the type of stone hardness matching is very important, if we use hammering to process high hardness stone, the wear of equipment parts will be very serious, which will increase our production cost.
2. Output size: the output is a key index for our design of stone production line. For example, there is a big difference between the plan of 100 tons per hour and 500 tons per hour. In addition, the output range of each type of equipment is not small. For example, the jaw crusher is between 1-1500 T / h. even if the difference between 300 tons and 500 tons is 200 tons, the configuration models will be different. Therefore, the configuration should be based on the specific output.