新闻动态
新闻动态 当前位置:首页>新闻动态>新闻动态

制砂机制造商将进行特殊的技术制砂

网址:www.dcjx08.cn  2019-08-02  作者:admin    阅读:

当提取转子时,须注意不要损坏定子线圈。如果转子的重量不大,可以用手拉出;如果重量很大,它应该是。首先,转子轴的两端用提升钢丝绳套住,用升降设备提升转子,然后慢慢拆下,注意防止线圈损坏。然后,在轴的一端刮擦钢管以刮擦轴颈。钢管衬有厚纸板,以连续移除转子。
When extracting the rotor, care must be taken not to damage the stator coil. If the weight of the rotor is small, it can be pulled out by hand; if the weight is large, it should be. Firstly, the two ends of the rotor shaft are enclosed by lifting wire rope, and the rotor is lifted by lifting equipment. Then the rotor is slowly dismantled to prevent the damage of the coil. Then, scrape the steel tube at one end of the shaft to scrape the journal. The steel tube is lined with thick cardboard to remove the rotor continuously.
当转子的重心移动到定子外部时,钢丝绳放置在转子轴的端部。在转子的中间,可以完全抽出转子。制砂机的拆卸完成。作为制砂机制造商,有必要提醒每个操作员,如果工厂的操作人员不熟练制砂机的操作技术,建议您联系制砂机制造商。制砂机制造商将进行特殊的技术制砂。机器相关问题。
When the center of gravity of the rotor moves outside the stator, the wire rope is placed at the end of the rotor shaft. In the middle of the rotor, the rotor can be completely pulled out. The disassembly of the sand machine is completed. As a manufacturer of sand machine, it is necessary to remind every operator that if the operator of the factory is not skilled in the operation technology of sand machine, it is recommended that you contact the manufacturer of sand machine. Sand-making machine manufacturers will carry out special technical sand-making. Machine-related issues.

出租电话
13313028229