新闻动态
新闻动态 当前位置:首页>新闻动态>新闻动态

在配置石料生产线时可以从以下几方面入手

网址:www.dcjx08.cn  2020-11-23  作者:admin    阅读:

在配置石料生产线时可以从以下几方面入手:
We can start from the following aspects when configuring the stone production line:
1、石料硬度:不同的石头选用的破碎机是不同的,像鹅卵石、花岗岩、石英石等这些硬度较高的石头,选择例如鄂破等设备会比较耐磨。如果是石灰石、石膏、煤矸石等硬度较低的石头,一般选用反击破、锤破、冲击破等设备,可以节省成本。根据石料硬度匹配种类非常重要,如果我们用锤破来加工高硬度石料,设备部件磨损会非常严重,这样会增加我们的生产成本。
1. Stone hardness: the crusher used for different stones is different. For stones with higher hardness, such as cobble, granite and quartz stone, the selection of equipment such as jaw crushing will be more wear-resistant. If it is limestone, gypsum, coal gangue and other low hardness stones, generally choose the equipment of impact breaking, hammer breaking and impact breaking, which can save cost. According to the type of stone hardness matching is very important, if we use hammering to process high hardness stone, the wear of equipment parts will be very serious, which will increase our production cost.
2、产量大小:产量是我们设计石料生产线的一个关键指标。比如每小时100吨与每小时500吨的方案就相差很大,再加之每类设备产量范围都不小,比如颚破在1~1500t/h之间,即使是300和500吨相差200吨的区别,配置的型号就会不同,所以还是要根据具体产量进行配置。
2. Output size: the output is a key index for our design of stone production line. For example, there is a big difference between the plan of 100 tons per hour and 500 tons per hour. In addition, the output range of each type of equipment is not small. For example, the jaw crusher is between 1-1500 T / h. even if the difference between 300 tons and 500 tons is 200 tons, the configuration models will be different. Therefore, the configuration should be based on the specific output.

出租电话
13313028229